VERTICAL BLIND CARRIER TRUCKS Home / Shop By Category / Vertical Blinds / Vertical Blind Spares / VERTICAL BLIND CARRIER TRUCKS / HILLARYS SLIMLINE VERTICAL BLIND TRACK REPLACEMENT TRUCK/CARRIERS HILLARYS SLIMLINE VERTICAL BLIND TRACK REPLACEMENT TRUCK/CARRIERS HILLARYS SLIMLINE VERTICAL BLIND TRACK REPLACEMENT TRUCK/CARRIERS £0.00 £0.00 (ex. VAT) Stock Status: In Stock select quantity trucks: 10 (+£6.15) 20 (+£10.00) 30 (+£14.20) 40 (+£16.65) 50 (+£18.85) 60 (+£20.50) control side: left control side right control side side they all stack-draw-bunch back to: all stack-bunch-pull back to left hand side all stack-bunch-pull back to right hand side middle split (bunch half to left & half to right for 3.5 inch or 5 inch wide blind slats: for 3.5" wide blind slats for 5" wide blind slats Add to your Wish List Information Specifications Reviews VERTICAL BLIND TRACK CARRIER TRUCKS- RUNNERS WITH STANDARD PLASTIC LINKS REPLACEMENT VERTICAL BLIND TRACK CARRIERS FOR NARROW-SLIMLINE HEADRAILS -TRACKS ONLY. STANDARD PLASTIC LINKS FOUND IN MOST SLIMLINE TRACKS,SUITABLE FOR 3.5" WIDE SLATS AND 5" WIDE SLATS. WILL FIT SLIMLINE NARROW TRACKS ONLY APPROX 30MM(+/- 2mm). NEW LONGER LASTING PLASTIC IS DESIGNED TO WITHSTAND SUN AND HEAT . SELF LUBRICATING PLEASE READ CAREFULLY. THESE ARE SOLD IN SETS OF 10/20/30/40/50/60, USE THE DROP DOWN MENUS TO SELECT THE QUANTITY AND OPTIONS YOU REQUIRE. IF YOU HAVE A LEFT HAND DRAW BLIND(all pulls & stacks back to the left hand side)YOU WILL NEED LEFT HANDED TRUCKS. IF YOU HAVE A RIGHT HAND DRAW BLIND(all pulls & stacks back to the right hand side)YOU WILL NEED RIGHT HANDED TRUCKS SPLIT DRAW BLINDS(like curtains) USE HALF LEFT HANDED TRUCKS & HALF RIGHT HANDED TRUCKS. CARRIER TRUCKS CAN EASILY BE SEPERATED TO THE REQUIRED AMOUNT BY CUTTING THE CARRIER TAILS OR SQUEEZING THE SIDES OF THE TAIL TO RELEASE. MAKE NOTES OR TAKE PICTURES OF HOW YOUR BLIND IS CORDED,OTHERWISE YOU WILL FORGET. SPLIT DRAW TRACKS ARE HARDER TO MAKE THAN LEFT OR RIGHT DRAW BLINDS.. ALWAYS REPLACE ALL OF THE CARRIER TRUCKS IN YOUR EXISTING TRACK. END STAR WASHER,DOMED WASHER AND CORD CLAMP BALLS ARE INCLUDED WITH EVERY ORDER. YOU MAY ALSO REQUIRE NEW 2.2MM BLIND CORD, INSTRUCTIONS ARE NOT SUPPLIED Condition: New Customer reviews No reviews left yet Write a review Most RecentTop Rated No reviews have been left for this product, be the first to leave a review
